A few examples of appraisal values for
TEA KETTLE

• GROUP OF METALWAREGroup of metalware,
  GROUP OF METALWAREGroup of metalware, to include an iron and brass ash bucket, a copper bucket, a copper tea kettle with iron tilter, a tall copper vase and three brass candlesticks, tallest - 18". NO in-house shipping for this lot. Condition: One candlestick - loose at base. Others - as expected wear and dings.
• FIVE PIECES OF COPPER COOKWARE, 19TH
  FIVE PIECES OF COPPER COOKWARE, 19TH C.Five pieces of copper cookware, 19th c., to include two strainers, posnet pot, tea kettle and a pot, tallest - 9". Condition: As expected wear.
• EARLY CAST IRON TEA KETTLE, 18TH C.Early
  EARLY CAST IRON TEA KETTLE, 18TH C.Early cast iron tea kettle, 18th c., 14" overall h.; together with two early cast iron porringers, one Thomas Clark stamped Bellevue . NO in-house shipping for this lot. Condition: Kettle - Small loss to rim. Porringer - one with losses to lining.
• SIGNED "EBERT" COPPER GOOSENECK TEA
  SIGNED "EBERT" COPPER GOOSENECK TEA KETTLE CA.1840-1860; dovetail constructed round copper pot with bent strap handle pin hinged on copper riveted flange mount and solder mounted gooseneck spout, wood knob on domed lid, handle with three strikes Ebert and #5 (attributed to James Ebert, tinner in Uniontown, Fayette Co., PA), 9"d, 13"x 7 1/4"; Condition: spout remounted, extensive cleaned surface, solder repair to crease damage on shoulder, replaced knob on lid, fair at best
• 2 PIECES OF COPPER COOKWARE CA. EARLY-MID
  2 PIECES OF COPPER COOKWARE CA. EARLY-MID 19THcentury; primitive dovetail constructed gooseneck tea kettle with brass knob on domed lid, molded arc swing handle on cupper pins in copper riveted flange mounts, 8 3/4"d, 12 1/2"x 7 1/4", Condition: lid and one sheet of tea kettle body unmatched, extensive creasing and dents; signed "J.S. Cropley, Phila" tubular handled copper kettle in dovetailed construction with pour spout, wire braced rim and riveted tapered tubular handle, approximately two gallon size, 10 1/2"d, 6 1/2"h, 10 1/4" handle, 3" spout, Condition: good
• COPPER GOOSENECK TEA KETTLE BY "JOHN
  COPPER GOOSENECK TEA KETTLE BY "JOHN WOLF,Cincinnati" ca. 1840; round form copper tea kettle in dovetail construction and mounted elbow or gooseneck spout, swing handle with maker's strike riveted pin hinges to copper riveted flange mounts, tea kettle with roll molded round copper lid with copper fancy knob, 8 1/4"d, 12 1/2"x 7 1/2"; [Note: Wolf was listed as tinner in 1840s directory]; Condition: some dents and minor creasing, repaired spout
• 2 PRIMITIVE ITEMS CA. MID-LATE 19TH
  2 PRIMITIVE ITEMS CA. MID-LATE 19TH CENTURY;homecrafted oak jointer's mallet with drawn shaved handle, arched chamfered edge head, initialed and carved cursive signed "D.L. Gulich" (unknown), 15 1/4", Condition: good, possible eastern PA; factory made tin tea kettle with two-part molded gooseneck spout, fancy knob on domed lid and rivet mounted swing handle, 6"x 9"x 5 3/4", Condition: as found, some surface rust
• 2 TABBY CAT REVERSE PAINTINGS ON GLASS
  2 TABBY CAT REVERSE PAINTINGS ON GLASS BY PATRICIAca. late 20th century; both reverse paintings on glass with multiple color tabby cats in interior of home, each depicting a gray tabby mother and kittens, signed by maker: Christmas scene with copper tea kettle in fireplace, two drawer stand, Christmas tree and several packages, 13"x 10" framed; cats and yarn depicting a living room scene with green love seat and chair, basket with colorful yarn balls and several kittens with cat and ball of yarn, 13"x 10" framed; Condition: both good
• 2 CAST IRON TEAPOTSca. 18th-early 19th
  2 CAST IRON TEAPOTSca. 18th-early 19th century; both early forged cast tea kettles with hand wrought iron handles: unsigned ball shaped tea kettle with gooseneck spout and flat cast lid with mounted knob, vertical central casting line and three small nub feet and shaped rod wrought iron swing handle on slot mounts, 8 1/2"d, 12"x 8", Condition: extensive surface pitting and rust; signed English form round kettle with gooseneck spout (weld mounted), acorn knob on dome lid and hand wrought iron fixed strap handle with horizontal mold line, 8"d, 13"x 10 1/2", Condition: cleaned, long slot pour line on base
• TURKISH BRASS ENGRAVED TEA KETTLETurkish
  TURKISH BRASS ENGRAVED TEA KETTLETurkish Brass Engraved Tea Kettle SIZE: 10.5"
• A Walter H. Wilson English Tea Kettle
  A Walter H. Wilson English Tea Kettle gross 27 ozt 9 dwt Height 9 1/4 inches.
• ROCOCO STYLE SILVERPLATE KETTLE ON STAND
  ROCOCO STYLE SILVERPLATE KETTLE ON STAND W/ BURNER English or American Rococo style silverplate tea kettle on stand, early 20th century, having a wide handle, repousse floral, cartouche, and acanthus motif, resting on a pierced stand, and raise on bird motif legs with disk feet, apparently unmarked. Approximate dimensions: h. 18", w. 10.5", d. 7.375".
• (24) ASSORTED COPPER COOKWARE ITEMS,
  (24) ASSORTED COPPER COOKWARE ITEMS, INCLUDING BAZAR FRANçAIS To include: (18) marked 'Bazar Français / New York / "666",' including a small lidded saucepan (4 1/2 in. dia.), a medium lidded saucepan (6 3/8 in. dia.), a larger lidded saucepan (7 1/8 in. dia.), (5) small sauce pans (3 1/8 in. dia.), (6) small round double-handled pans (5 in. dia.), and (3) frying pans (6 1/2 to 9 3/8 in. dia.), all with copper finish and brass handles, as well as a fondue pot with copper finish and wooden handles (10 1/2 x 9 3/8 in. dia.); lot also includes a small tea kettle marked "OPA / MADE IN FINLAND" on handle (6 1/2 in. tall with handle raised), the rest unmarked to include a large kettle (11 1/2 in. tall) and (4) pitchers (smallest 3 1/4 in., largest 10 1/8 in. tall).
• (4) Pcs silver plate, c/o Crescent teapot,
  (4) Pcs silver plate, c/o Crescent teapot, sugar bowl & creamer (engraved "McK"), Birmingham Silver Co tilting tea kettle
• (4) Copper roasting pan, pot and tea
  (4) Copper roasting pan, pot and tea kettles to include V. Olac and Sons Philadelphia double handled copper roasting pan, 16 1/2" L x 11"W x 10"H, 21" L handle to handle, a copper bodied double handled pot, unsigned, 13 3/4" dia, 15 3/4" handle to handle, 9 1/2"H, along with (2) copper kettles, the smaller of which marked 8 handle.
• Group includes 3 Betty Ware by Banner
  Group includes 3 Betty Ware by Banner plastic toy cookware pieces: frying pan, lidded pot, and lidded tea kettle (has a crack). And 5 pieces of Copper Clad Stainless Steel toy cookware: frying pan (Revere Ware), coffee pot (marked Revere Ware), tea kettle (marked Revere Ware), lidded pot , and a stock pot with lid (knob on lid is missing). In overall good condition, please see the photos. We do our best to describe all items in detail and provide pictures. If you have any doubt, please ask questions! We will provide extra pictures, or can schedule an in person or video conference preview at your convenience. In house Flat Rate Shipping of $15 is a domestic shipping estimate and includes insurance. We will gladly combine multiple lots for your convenience and economy. Each additional doll item we can pack in the same box is $5. Please feel free to contact us with any questions.
• INLAID-IRON TESTUBIN (TEA KETTLE) WITH
  INLAID-IRON TESTUBIN (TEA KETTLE) WITH SWALLOW AND REEDS MEIJI PERIOD ?? ?????? ???????????cast in iron and of slightly tapered cylindrical form with a short spout, the body decorated in silver and gold nunomezoganwith flying swallows and reeds, the upper edge and lower waistline presented with an erosion design and rocky lines, the handle adorned with a pair of swallows in silver, the bronze cover finished with a flower-bud finial and signed on the underside Ryubundo zo(1)16.5cm wide; 1350gProvenance: Private English collection, PerthshireNote: Ryubundo is one of the leading studios in the Japanese Metalware industry. With many classic and significant masterpieces passing down through generations, Ryubundo kettles are produced with the highest standard of craftsmanship, and with precious materials.From the founder of the studio, Shiho Ryubun (1735-1798), every successive director of the studio Ryubundo were talented not only in metalworking, but also in painting, calligraphy, and poetry. Therefore, the aristocratic, literatic tastes are the main features of Ryubundo tetsubin. From the middle of the Edo Period (1603-1868) when tea culture was popular everywhere in Japan, the development of Ryubundo reached a boom, and this boom continued to the latter Meiji Period (1868~1912). The studio was mentioned in the ironic novel by the famous Japanese writer Natsume Soseki,I Am a Cat. The sentence writes “those people living a luxurious life would lose their sleep if they could not hear the sound made by the lid of Ryubundo iron kettles when water is boiling.”A closely comparable Ryubundo iron testubin of similar form and technique, but with butterfly decoration, was sold at Bonhams New York, 15 March 2017, lot 6300.
• GROUP OF METALWARE, 19TH AND 20TH C.Group
  GROUP OF METALWARE, 19TH AND 20TH C.Group of metalware, 19th and 20th c., to include an American copper tea kettle, tin strainer, wrought iron spider pan, meat fork, door latch and various hooks. Provenance: The Collection of Mary Ann McIlnay, York, PA. NO in-house shipping for this lot. Condition: As expected wear.
• GROUP OF COPPER TEA KETTLES AND POTS,
  GROUP OF COPPER TEA KETTLES AND POTS, 19TH C.Group of copper tea kettles and pots, 19th c., tallest - 8". NO in-house shipping for this lot. Condition: As expected wear.
• FREDERICK HUBLEY COPPER TEA KETTLE,
  FREDERICK HUBLEY COPPER TEA KETTLE, LATE 18TH C.Scarce Frederick Hubley, Lancaster, Pennsylvania copper tea kettle , late 18th c., overall - 9 3/4" h. Competitive in-house shipping is available for this lot. Condition: As expected wear and condition consistent with age and use.
• COPPER TEA KETTLE WITH HANDLE Vintage
  COPPER TEA KETTLE WITH HANDLE Vintage copper tea kettle with handle. 7" H x 6.5" diameter at base. Dents and some corrosion noted.
• MICHAEL GRAVES FOR ALESSI STAINLESS
  MICHAEL GRAVES FOR ALESSI STAINLESS STEEL KETTLE Michael Graves for Alessi stainless steel teapot / tea kettle, with blue resin handle and red resin bird attachment for spout, maker's mark underside. 9.5" H x 8.75" diameter.
• MACKENZIE-CHILDS POLKA DOT STOOL W/TEA
  MACKENZIE-CHILDS POLKA DOT STOOL W/TEA KETTLE LEGSMackenzie-Childs stool, having polka dot upholstered seat, with checkered and fabric trim, rising on legs fashioned from tea kettles, on ball feet, approx 15.5"h, 20"w, 20"d
• (5) COPPER & BRASS KITCHENWARE, KETTLE,
  (5) COPPER & BRASS KITCHENWARE, KETTLE, COFFEE POT(lot of 5) Brass and copper kitchenware, including: (1) American copper coffee pot, Manning, Bowman & Co., with silver-tone handle and collar, brass hinged lid with finial, restoration to finial, approx 11.5"h, (1) copper tea kettle, applied brass cartouches with stamped stars and geometric motifs, marked JUC (?) underfoot, approx 13"h, (1) long brass fork, approx 18.5"l, (1) long brass spoon, approx 17 3/8"l, (1) brass ladle, approx 18.25"l; 7.5lbs total
• (6) MACKENZIE CHILDS CERAMIC ENAMEL
  (6) MACKENZIE CHILDS CERAMIC ENAMEL TEA SERVICE(lot of 6) Mackenzie Childs ceramic tea service, in the Courtly Check Enamel pattern, comprising: (1) tea kettle, 13"h, 11"w, 9"d, (4) mugs, 3.5"h, 5"l, 4.25"w, and (1) tray, with rattan sides, 2"h, 15"l, 12"w, each contained in the original branded boxes; 11.5lbs total
• (6) COLLECTION OF FRENCH COPPER KITCHENWARE(lot
  (6) COLLECTION OF FRENCH COPPER KITCHENWARE(lot of 6) French copper kitchenware, 19th c., highlights include: (1) pitcher, 19"h, 14.5"l, 8"w, (1) tea kettle, 10.5"h, 14"l, 10"w, (2) food molds, largest: 4.75"h, 5.75"diam; 31.5lbs total
• (9) COLLECTION OF FRENCH COPPER PANS
  (9) COLLECTION OF FRENCH COPPER PANS & KITCHENWARE(lot of 9) French copper pans and kitchenware, 19th/ 20th c., highlights include: (1) tea kettle, missing lid, 12.5"h, 12"l, 8"w, (1) pot, 7.5"h, 21"l, 10.5"w, (1) small pot with parcel gilt lidded cover, 3.75"h, 7.5"l, 4"w, (1) lidded tray, with missing foot, 3.5"h, 17.5"l, 9"w; 22lbs total
• STERLING. (5) PC. WATSON MEADOW ROSE
  STERLING. (5) PC. WATSON MEADOW ROSE STERLING TEA Set. 5 piece Watson Meadow Rose sterling tea service comprised of a coffee pot, teapot, lidded sugar bowl, open waste vessel, and creamer. All items stamped to underside, "Sterling S220" with a pictorial Watson makers mark. Total approx. weight of all items is 92.86 troy oz (gross). From a Lakeville, CT estate. Dimensions: coffee pot measures approx. 10.50" in height. Condition: Good with light surface scratches and minor dings/dents. Foot of tea kettle exhibits dents.
• SILVER. (5) PIECE ENGLISH SILVER TEA
  SILVER. (5) PIECE ENGLISH SILVER TEA SERVICE. A William Lukin Reproduction Circa 1707 (5) piece English silver tea service comprised of a coffee pot, teapot, lidded sugar, tea kettle, and creamer. Beautiful applied silver detailing to wooden handles. With London city stamps, maker's mark of Wilson & Gill, and date letter of 1960. Total approx. weight of all items is 121.11 troy oz (gross). From a Scarsdale, NY estate. Dimensions: coffee pot measures approx. 9.5" high. Condition: Good, with light surface scratches and minor dings/dents.
• WEDGWOOD "COLONNADE" BLACK PORCELAIN
  WEDGWOOD "COLONNADE" BLACK PORCELAIN SERVICE. To include: 12 plates (10.75" dia), 12 plates (8" dia), 12 plates (6" dia), 12 saucers (5.75" dia), 12 teacups (2.75"h x 3.25" dia), lidded tureen (6.5"h x 8" dia), sauceboat (5.25"h x 9"w x 4"d), sauce boat plate (7.75"w x 5.75"d), tea kettle (5"h x 9.25"w x 6.5"w). Includes miscellaneous lid and 10 Plates (8") in "Ulander" pattern. From a Westchester NY home. Condition: Good.
• MEISSEN LOT OF ASSORTED PORCELAIN CABINET
  MEISSEN LOT OF ASSORTED PORCELAIN CABINET ITEMS. From a Scarsdale, NY estate. Dimensions: Largest bust: 9" h; 2 smaller bust: 4.5" h; smallest bust measures 4.25" h. Condition: Update 9/30/22 missing piece to tea kettle . Bow in hair and around neck missing pieces. Photos added
• MACKENZIE CHILDS, ENAMEL TEA KETTLE
  MACKENZIE CHILDS, ENAMEL TEA KETTLE AND PITCHER Contemporary, hand painted and transfer decorated enamel including a lidded tea kettle (10.5 in.); and a pitcher (12 in.), signed.
• COPPER GOOSENECK TEA KETTLE BY JONAS
  COPPER GOOSENECK TEA KETTLE BY JONAS MEYERS, LITITca. 1832-1846; ball shape dovetail constructed two sheet kettle with solder mounted gooseneck spout, domed lid and wide strap handle on copper rivet hinged rivet on wide flange mount with two copper rivets and handle impressed by maker, 8 1/2"d, 13"x 7 1/2"; [Provenance: bought at Horst Auction Center in 1999]; Condition: lid missing knob, some denting, later solder to gooseneck spout
• COPPER TEA KETTLE BY JOHN W. SCHLOSSER,
  COPPER TEA KETTLE BY JOHN W. SCHLOSSER, YORK, PAca. early-mid 19th century; dovetail constructed two sheet ball shaped kettle with rivet and solder mounted gooseneck spout, domed lid with brass knob and strap swing handle, copper rivet hinge mounted to flange mounts on copper rivets, strap handle marked by "John W. Schlosser" attributed to York, PA, 9"d, 12 3/4"x 7 3/4"; Condition: repairs along base edge, as found, some denting, associated to noted coppersmith George Schlosser
• 2 KITCHEN PRIMITIVESca. mid 19th century;
  2 KITCHEN PRIMITIVESca. mid 19th century; early wooden drawer box base coffee mill with spun brass hinged capped hopper, box is mixed walnut and mahogany dovetailed with birch wood, secondary on drawer, mill has iron strap mounted burr mill with bed bolt adjuster, 8 1/2"x 7 1/2"x 9 1/2", Condition: repair to drawer box front, good; ball shaped copper tea kettle with gooseneck spout and tubular grip swing handle, dovetailed kettle with domed lid and brass knob, swing handle copper pinned to rivet mounted hanger, interior tin washed, 9"d, 13"x 8 1/4", Condition: good
• UNSIGNED COPPER GOOSENECK TEA KETTLEca.
  UNSIGNED COPPER GOOSENECK TEA KETTLEca. 1830-1860; dovetail constructed ball shaped kettle with solder and rivet mounted gooseneck spout, copper strap swing handle, copper rivet pin hinged on copper riveted bat and wing shaped mount, domed lid with ornament cast copper knob, hand hammered construction with interior tin wash, 10"d, 14 1/2"x 8 1/2"; Condition: older cleaned surface, minor creasing to neck of spout